Showing posts with label Tutorials. Show all posts
Showing posts with label Tutorials. Show all posts

Tuesday, September 28, 2021

DIY Party Favor: Pom Pom Pencils

Have you tried making pom poms? A few years ago I went through a pom pom making craze and made ton of them. They are so fun and fast and colorful. Once you learn how to make them with out any tools but your hands and a pair of scissors you won't be able to stop making them. They are great fun to make with friends as a summer boredom buster. Here is a fun idea of what to do with all those pom poms you can't stop making. Put them on a pencil! 

Wednesday, April 7, 2021

Easy Paper Wedding Flag Tutorial

 This post may contain affiliate links


A few years ago I hosted a Wedding Open House at the end of summer for some dear friends. It was thrown together a bit at the last minute so I needed some simple decor that would make a statement.
I decided to decorate with some Downton Abbey inspired paper flags. Did you see the wedding episode (Season 6, Episode) where Carson and Mrs. Hughes were married? At their reception they had white flags decking the hall. Isn't this just the picture perfect wedding hall!

Saturday, July 18, 2020

How to Sew an Invisible Zipper in a Pillow



This post contains a few affiliate links.

Hello Sewing friends!! I have a fun make to show you today!! I sewed up this beautiful pillow for  my sister's birthday and I am in love with how it turned out. I made it using the Patchwork Prism Pattern designed by Anna Maria Horner for Janome. I used the pillow sham variation and now that I see how beautiful it is in real life I just may make the whole quilt. Anyway as I was making it I thought I'd snaps some pics and write up a little tutorial for you on how to insert an invisible zipper in a pillow. Scroll down to see all of my tips and tricks. 


For a long time invisible zipper installation was very frustrating to me. I would read those directions that come on the little cardboard packaging and get confused. Also I tried using that little special invisible zipper foot you can buy which somehow is supposed to make it easy to sew. I didn't really have luck with those feet. Instead over the years I have figured out a few tricks that make invisible zipper installation much less painful and more successful with out much extra effort. So here we go!



STEP 1. PRESS THE ZIPPER TEETH FOLD OPEN
If you take a look at the RIGHT side of the invisible zipper you'll see that it is completely flat and the zipper teeth are "invisible". The zipper teeth actually sit on the WRONG side of the zipper. In fact, the teeth are folded toward the wrong side. Unzip the zipper , unfold the zipper teeth, and iron the WRONG side of the zipper flat.  This takes a little persistence but this step is KEY to getting a good invisible zipper insertion. I usually have good results using a HOT iron and have never melted my zipper but I would suggest starting with a medium hot iron to start with and use just enough heat to get a good press. Do this with both halves of the zipper. 


STEP 2. PREPARE THE PILLOW PANELS.
For my pillow panels I chose to make mini quilt "sandwiches". I used a layer of batting in between 2 pieces of quilting cotton and added some quilting stitches for each side.  For the front Patchwork Prism panel I stitched in the ditch of each triangle line. Here is what the back panel looks like all read to go.  


Quick Tip: You can use a patterned fabric for the inside and follow it to make nice even quilting pattern, I used this fabric on the inside of the back panel and just sewed along the purple flowers so I didn't have to mark a grid. Sew easy! These will make a nice sturdy pillow cover for my pillow insert.


I also serged along the edge of each panel to minimize fraying. You can use a wide zig zag stitch here as well but it isn't really necessary. 

STEP 3.  ATTACH THE ZIPPER TO ONE PANEL
Pin or use binding clips to attach one zipper half to the edge of one pillow panel, in the center and with the RIGHT sides together.

Using a zipper foot, and starting with the zipper zipped up a little, sew as close to the zipper as you can and stop about an inch away from the zipper stop. Keeping the needle down lift the presser foot and slide the zipper open so the zipper slide is on the other side of the presser foot. 

Now open up the fold all the way and sew close to the zipper. Use a stiletto or sharp scissors to hold the fold open as you sew close to (but NOT ON) the fold line. 

Sew all the way through past the end of the zipper tape. This photo also shows how close I sewed to the fold line.

STEP 4.  ATTACH THE ZIPPER TO THE 2ND PANEL
Lay the 2 panels with right sides together and match up the corners. Pin or clip the the other side of the zipper to the 2nd panel. 

Get it started with the panels together and then flip the panel over to pin it the rest of the way. Sew the zipper to the panel as in STEP 3. 

 One more thing to note: At the end near the zipper stop it is impossible to sew close to the teeth. Don't sweat this! It will be covered by finishing stitches. Just sew all the way to the end of each zipper tape. You can avoid this problem by using an invisible zipper that is much longer than you need but I didn't have that luxury here. 

STEP 5: PRESS THE ZIPPER FOLDS CLOSED 
Zip up the zipper and coax the fabric together to hide the zipper. Make sure the zipper tape is laying flat and open underneath.  Press over the zipper from the top using STEAM and EXTRA TIME to allow the heat to travel through all of the layers. As you can see in the right side of the photo below, there is about an inch or so at the end  near the zipper stop where the fabric does not meet. This is OK because we will hide it in the next step.


STEP 6: SEW AROUND THE SIDES OF THE PILLOW.
Place the 2 pillow panels together, match them at the corners, and pin around all 4 sides. You will need to sew around the pillow with a 1/2 inch seam allowance starting about an inch below where the zipper starts and finishing about an 1 1/2 inches above the zipper stop. DO NOT FORGET TO UNZIP THE ZIPPER PART OF THE WAY.
      

Use the zipper foot to sew near the zipper. I usually sew near the zipper at the top and bottom first and then switch to a regular foot to sew the rest of the way around. You will notice the half inch seam comes about 1/8th inch to the inside of the zipper seam. These 2 seams should never meet. 

STEP 7. TURN THE PILLOW RIGHT SIDE OUT AND PUSH OUT THE CORNERS. It is not necessary to trim the corners for a perfect point. Insert a pillow form and you are done! This pillow is the perfect fit for a King sized pillow. I stuffed it with this Bamboo pillow I found on Amazon.



Last TIP: Do not overstuff  the pillow! The zipper will be more visible if you do.

And that is IT! Enjoy your beautiful new pillow and make another so you can practice your new skill. 

HAPPY SEWING!


Thursday, February 7, 2019

Mini Yarn Wreath Pattern Weights

Hi there sewing friends!  I wanted to pop in and show you how to dress up one of my favorite sewing notions. Pattern weights!! These are simple 3/4'' washers that I picked up from Home Depot to use as pattern weights. I thought it would be fun to make them pretty to give a little gift to my mom on her birthday. I've shared how to make Mini Yarn Wreath Pattern Weights  in the past as part of National Sewing Month with The Sewing Loft but I thought it would be fun to share here again too.   I think they are the perfect gift for a fellow sewist, don't you?